产品中心 > 功率电子产品 > 功放电源 > GCL – 接地电流限流器
  • GCL – 接地电流限流器

  • 供应商:

    AE Techron (non-EMC)
  • 描述:

    GCL能够在接地电流超出时提供主动保护。GCL比AE Techron功放中标配的地面电流保护器(一个2.7ohm电阻器,设计在功放机壳地与COM端口/常用输出端口之间)的性能更好。这是因为在工作中,GCL将功放设置为待机状态,并且在故障发生时提供可视化指示,同时支持方便重置。

  • 购买/询价
全国范围专业内的 功放电源 工程师/销售 将在最短时间内处理你的咨询!

详细信息

>>品牌 AE Techron (non-EMC) 0 种产品 可在 嘉兆商城 购买!

 AE Techron’s GCL provides active protection against excessive ground current. It is superior to the factory-default ground-current protection on many AE Techron amplifiers (a 2.7-ohm resistor between the amplifier’s Chassis Ground and COM or Sampled Common output terminals) because it places the amplifier

in Standby, provides a visual indication that a fault has occurred, and can be easily reset.
 
The GCL protection module is ideal for environments where recirculating ground currents are likely or amplifiers might be incorrectly connected. It is recommended when amplifiers will be connected in multiple configurations or will be used by inexperienced staff members.
 
The GCL combines several functions into one convenient DB-25 package. A comparator circuit monitors the voltage difference between the system’s input ground and earth/safety ground. If the voltage differential between these two grounds exceeds ±4V, the GCL will automatically place the amplifier in Standby. In addition, the GCL has a second level of protection that monitors the current flow between signal ground and earth ground. When the current between these exceeds safe
levels, the current is limited. This combination of current limit and voltage monitoring provides very robust protection against real-life measurement mistakes and DUT failures.
 
When the GCL module protections are activated, the red LED located on the top of the GCL will illuminate and the amplifier will be placed in Standby. When the ground potential between the two terminals decreases to a safe level, the red LED will turn off, and the amplifier will be brought out of Standby mode.
 
The GCL plugs into the DB-25 Interlock/IO connector located on the amplifier’s back-panel SIM input card and can be used on all AE Techron amplifiers that use a SIM card. Since the GCL is a “feedthrough” device, the DB-25 Interlock/IO connector can still be used for other purposes and applications when the GCL is in place. 
 
Specifications
Power Supply: Self-powered through DB-25 connector
Activation Level: ±4V (1.5A)
Dimensions(HxWxD): 2.5 in. x 2.2 in. x 0.7 in. (64 mm x 56 mm x 18
mm)
 
 
Features
• Provides active protection against excessive
ground current.
• Replaces the 2.7-ohm resistor used on many
AE Techron amplifiers.
• Automatically places the amplifier in Standby.
• Red LED notifies the user of GCL activation.
• Fast, easy installation.
 
 
Refer to Figure 1 and complete the following steps to
install the GCL module.
1. Remove the 2.7-ohm resistor installed between
the COM or Sampled Common terminal and the
Chassis Ground terminal located on the amplifier’s
back panel.
2. Plug the GCL module into the DB-25 connector located
on the SIM input card on the amplifier’s back
panel. Tighten the GCL’s two mounting screws to
attach the GCL firmly to the amplifier back panel.
3. Attach one wire from the GCL to the amplifier’s
COM/Sampled Common output terminal.
4. Attach the other wire from the GCL to the amplifier’s

产品留言 我们专业的 功放电源 销售/工程师 将在最短时间内处理你的问题

  • 请填写您的姓名

  • 方便收取我们最新的产品信息

  • 您所在公司或机构的名称

同品牌产品
功率电子测试产品
关于嘉兆
嘉兆简介
荣誉证书
加入团队
荣誉客户
联系我们
我们的品牌
客户服务
在线客服
客户留言
目录索取
设备维修
维修.校准.升级
专业培训
系统服务
设备保养
嘉兆动态
新闻中心
展会活动
基础知识库
其他服务
商城
软件无线电
友情链接
关注我们
版权信息
嘉兆科技(CORAD)所发布展示的“产品信息”,“解决方案”版权归嘉兆科技所有,嘉兆科技拥有其代理权。任何收集本站产品信息并未经嘉兆科技许可,嘉兆科技将保留追究侵权者法律责任的权利。

粤ICP备 06126740号 嘉兆网 © Corad Technology Ltd. 始创于1980年

在线客服